top of page
workers installing a torch-down modified bitumen membrane on a flat roof using a propane heat torch

Flat roof repairs & installations in Belfast

Two established system options. Repairs and complete renewals. Dedicated four-person roofing team.

Flat roofing shaped around real defects

Deck condition checked

We consider the surface beneath the membrane before covering visible damage.

Edges sealed carefully

We pay close attention to outlets, penetrations and raised roof junctions.

Two system options

We install rubber membranes and layered torch-on felt where each is suitable.

Keep water moving off the flat roof

A flat roof still needs a controlled fall. Sound decking, continuous waterproofing and properly sealed edges guide rain towards the outlet instead of towards the ceiling below. We carry out flat roof repairs for splits, failed seams, worn surfaces and leaks around upstands or penetrations. Ponding water can also point to drainage or fall problems that need more than another layer on top. We inspect the membrane, deck and connected details to see where the system has failed and how far moisture may have spread.

a newly installed or repaired flat roof, likely featuring a seamless fibreglass (GRP) or smooth synthetic membrane system between brick parapet walls
workers installing a torch-down modified bitumen membrane on a flat roof using a propane heat torch

Repair the membrane or renew the system

A local repair can suit a limited defect where the surrounding membrane and deck remain sound. Full renewal may make more sense when the covering is old, failures are widespread, or moisture has affected the supporting deck. We install rubber roofing and torch-on felt, with each system covered in detail on its own page. Preparation matters whichever material is chosen: the substrate must be suitable, edges and outlets need careful treatment, and weather conditions must allow the work to be completed correctly.

Frequently asked questions

Q1. What causes flat roofs to leak?

Common causes include deteriorating membranes, damaged joints, failed flashing, blocked outlets and standing water. Leaks can also develop around roof penetrations.

Q2. Can a leaking flat roof be repaired?

Many flat roof leaks can be repaired if the underlying structure remains sound and the existing roofing system is suitable for repair.

Q3. How long does a flat roof last?

The lifespan depends on the roofing system, installation quality, drainage, exposure and maintenance. Different materials have different expected service lives.

Q4. What is the best material for a flat roof?

Common options include EPDM rubber, GRP fibreglass, bituminous systems and other specialist membranes. The best choice depends on the roof's design, use and budget.

Q5. Should water remain on a flat roof after rain?

Some temporary surface water can occur, but persistent ponding may indicate inadequate drainage or an issue with the roof's falls. It should be assessed if it remains for prolonged periods.

​

​

​

workers installing a torch-down modified bitumen membrane on a flat roof using a propane heat torch

Discuss your flat-roof problem

Call us to explain the roof size, visible surface damage and where water is collecting or entering.

bottom of page